25180 resultaten
Powerflex 2024 - PU Bussen en Rubbers
FILTERMENU
De voordelen van Powerflex :
- - Verlengde levensduur van de banden
- - Verbeterde prestaties
- - Verhoging van de veiligheid
- - Een grotere kosteneffectiviteit
Powerflex Black Series - Voor circuit en race applicatie's de beste keuze
Heritage Series - Voor OldTimers
Gebruik onze selectie wizard om bij de onderdelen uit te komen welke geschikt zijn voor uw type auto
VOLLEDIGE TEKST
Fits early models up to around 2007 with a 46mm wide bracket. PFF1-502-46 Fits early models up to around 2007 with a 46mm wide bracket.PFF1-502 Fits later model from around 2007 on with 54mm wide bracket.
€ 70,49
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Fits early models up to around 2007 with a 46mm wide bracket. PFF1-502-46 Fits early models up to around 2007 with a 46mm wide bracket.PFF1-502 Fits later model from around 2007 on with 54mm wide bracket.
€ 77,54
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Fits models from around 2007 on with 54mm wide bracket.et. PFF1-502-46 Fits early models up to around 2007 with a 46mm wide bracket.PFF1-502 Fits later model from around 2007 on with 54mm wide bracket.
€ 77,54
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
This parts fits non-Ti vehicles with a 22mm diameter anti- roll bar. For Ti models please use PFF1-503-24BLK. Please check anti-roll bar diameter before ordering.
€ 33,47
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
This parts fits non-Ti vehicles with a 22mm diameter anti- roll bar. For Ti models please use PFF1-503-24. Please check anti-roll bar diameter before ordering.
€ 37,17
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
This parts fits Ti vehicles with a 24mm diameter anti-roll bar. For non-Ti models please use PFF1-503-22. Please check anti-roll bar diameter before ordering.
€ 33,47
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
This parts fits Ti vehicles with a 24mm diameter anti-roll bar. For non-Ti models please use PFF1-503-22BLK. Please check anti-roll bar diameter before ordering.
€ 37,17
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
For an adjustable version of this bush please use PFF1-505G.
€ 46,97
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
For an adjustable version of this bush please use PFF1-505GBLK.
€ 51,69
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
On-car adjustable bush allowing changes to the camber and caster angles. The hole is offset by 7.5mm offering approx. +/- 1 of camber adjustment. Use in conjunction with PFF1-506G. For a non-adjustable version of this bush please use PFF1-505.
€ 79,13
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
On-car adjustable bush allowing changes to the camber and caster angles. The hole is offset by 7.5mm offering approx. +/- 1 of camber adjustment. Use in conjunction with PFF1-506GBLK. For a non-adjustable version of this bush please use PFF1-505BLK.
€ 79,13
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
For an adjustable version of this bush please use PFF1-506G.
€ 46,97
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
For an adjustable version of this bush please use PFF1-506GBLK.
€ 46,97
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
On-car adjustable bush allowing changes to the camber and caster angles. The hole is offset by 7.5mm offering approx. +/- 1 of camber adjustment. Use in conjunction with PFF1-505GBLK. For a non-adjustable version of this bush please use PFF1-506.
€ 79,13
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
On-car adjustable bush allowing changes to the camber and caster angles. The hole is offset by 7.5mm offering approx. +/- 1 of camber adjustment. Use in conjunction with PFF1-505GBLK. For a non-adjustable version of this bush please use PFF1-506BLK.
€ 79,13
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
These bushes incorporate steel support washers that are designed to spread load across the arm and protect the bushes from sharp edges found on pressed steel arms.
€ 75,21
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
These bushes incorporate steel support washers that are designed to spread load across the arm and protect the bushes from sharp edges found on pressed steel arms.
€ 82,69
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Rear Trailing Arm Rear Inner Bush Diagram Reference: 11 Aantal Nodig: 2 Pack Size: 2 STAAT ER 2,3,4 enz PER AUTO NODIG DAN DIENT U ER ZOVEEL TE BESTELLEN ALS AANGEGEVEN, PER STUK IS HELAAS NIET MOGELIJK. Prijzen vermeld zijn Per Stuk! OEM nummers: OEM 1 :51799865 - 51799866 OEM 2 :51799867 - 51799868 OEM 3 :
€ 50,09
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Rear Trailing Arm Rear Inner Bush Diagram Reference: 11 Aantal Nodig: 2 Pack Size: 2 STAAT ER 2,3,4 enz PER AUTO NODIG DAN DIENT U ER ZOVEEL TE BESTELLEN ALS AANGEGEVEN, PER STUK IS HELAAS NIET MOGELIJK. Prijzen vermeld zijn Per Stuk! OEM nummers: OEM 1 :51799865 - 51799866 OEM 2 :51799867 - 51799868 OEM 3 :
€ 50,09
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
PFF3-1663 Jacking Point Insert is a 95A durometer polyurethane bung that presses up into the vacant hole in the chassis providing a fit and forget solution for safer lifting - Recommended for lifting across 4 lift points simultaneously to avoid damage. For those that have the OE lifting adaptors, PFF3-1662 Magnetic Jack Pad is a CNC-machined Jack Pad with a built-in magnet to suit OE lifting adapt...
€ 32,89
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
PFF3-1663 Jacking Point Insert is a 95A durometer polyurethane bung that presses up into the vacant hole in the chassis providing a fit and forget solution for safer lifting - Recommended for lifting across 4 lift points simultaneously to avoid damage. For those that have the OE lifting adaptors, PFF3-1662 Magnetic Jack Pad is a CNC-machined Jack Pad with a built-in magnet to suit OE lifting adapt...
€ 101,06
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the cast bracket, see part numbers above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket without voids use PFF3-1324. For an extr...
€ 55,61
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the cast bracket, see part numbers above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket without voids use PFF3-1324. For an extr...
€ 55,61
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
PFF3-905 Lower Engine Mount Small Bush is a replacement for the often softened and perished, rubber bush in the original 'dog bone' shaped bracket, helping to restrict engine movement and improve gear changes.Fits 42mm diameter, for bushes with a 38.5mm diameter please use PFF85-505.
€ 39,93
Op bestelling leverbaar
2-3 weken
Verzendkosten: € 8,95 (Nederland)
